it was a fuel pump. it ended up being a blown fuse because of some wires that were pulling out of a white wiring harness. it has about 8 wires or so on it and it plugs in to the harness for the column
...fuel pump fuse is not blown. You can bleed off any trapped air by having someone turn on the ignition while you hold the release valve somewhere in the rail injector. It looks like a valve stem on a ...
...fuel pump is working and the filter has been changed. the truck is turning over but not getting fuel. what can be the problem? CHECK FUEL INJECTORS FUSES IF FUSES GOOD PROBLEM COULD BE IN THE PCM ...
...fuel pump and filter. We verified that fuel is getting to the rail but the truck still won't start. spray a little starter fluid and it fires up then dies. What would cause this? Tim have you checked ...
fuel pump? fuel pump relay , or fuel pump. Probably not regulator. Have someone cycle the key to the on position and listion next to the gas filler neck to hear if the pump runs for a few seconds . If
no power to fule pump ',had blown fuse,replaced fule pump.broken wire or what? look in manual to see if u have a fuel reset button.
fuel pump fuse to be blown, changed it, boosted it, it cranked and almost rolled over but still wont start? So that tells me that the fuel pump is indeed working but cant figure out why it wont start?
Question about 2000 Sierra
...fuel pump still dont work change fuel pompe still dont work 4x4 5.7 Check fuel pump relay. There are times a failed fuel pump may cause a blown ECM fuse. Usually ECM B or ECM / PCM 2 fuse will be ...
Usually answered in minutes!
987 Questions
847 Questions
676 Questions
601 Questions
604 Questions