Questions & Answers for: Mercury fuel pump blown fuse

...fuel pump to see if it was bad. By probing wire with a hot lead. Both fans on the motor came and now the starter will not engage. I've put a new fuel pump in reconected all. But when I go to start ...

...fuel pump and still wont start I put a new fuel pump on my 2002 mercury cougar and now it can't get fuel to the fuel pump and I have changed the fuel filter. don't know what is wrong with it. your ...

fuel pump or fuel filter No sensor. Start by replacing the fuel filter. You may also have a weak fuel pump or a bad pump. Make sure the pump is actually running. Have someone listen at the fuel filler

fuel pump, Usually you can hear the pump and everything else come on when you turn the key to the on position no start, if nothing comes on I would look into the key switch, let me know what you find

running out of gas You may have blown either the fuel pump fuse or the fuel pump itself. The fuel in the tank cools the pump. If there's no gas, the pump can overheat and burn out the fuse or the pump

Fuel pump had a bad wire, fuse was blown. Fixed both and van still won't stay running. Maybe a bad fuel pump. Is it humming niormally in the fuel tank? Will it start for a few seconds? Need more info.

fuel pump is not getting any power fuel safety switch reset is working and fuel pump shut off is operational..All fuses are good and arent blown...the vehicle isnt getting any fuel to the engine and ...

was putting out too many amps and burned out fuel pump and battery. i replaced battery fuel pump and alternator and fuel pump is not responding nor headlights what di i do next Check for blown fuses..

...fuel pump and fuse please help thank u Madelynn bogert did you also replace the fuel filter . Before replacing fuel filter I'd suggest to have a gas pipe blown through with the pressured air to make ...

...fuel pump,fuel pump relay on the same circuit as something else etc.and see if it's still blown again or is the fuse good if it was for the fuel pump check the relay and change it try again if still ...