Questions & Answers for: Dodge Intrepid fuel injectors

...fuel injectors can the fuel injector be changed or do you clean it and if so with what you can change out the fuel injector with a new one, fairly easily, or you can remove the old injector and spray ...

...fuel injectors, if you here a noise when you attempt to start the car it may be the starter trying to start the engine, if this is the case it is most likely a fuel rail issue or fuel pump the ...

I smell gas within the car....Is it the fuel injector? a crack or faulty O ring in the injector? when tracing smells use your eyes and nose common causes are loose or leaking fuel pipes do not drive a

fuel sending line to the injector rail, should i have replaced the orings and if so should i replace all the o-rings to the injectors also if all the injestors on the rail came out i would replace the

...fuel rail and all the injectors as an assembly then once it's out you can remove the #6 injector from the rail. It doesn't hurt to spray a little wd40 around the injectors to ease removal sometimes ...

...Fuel Injectors: If the Fuel Pressure/Volume at the Fuel Rail is fine, then it is not the Fuel Filter or the Fuel Pump. The problem is "downstream". It may be the electrical aspect of the Fuel ...

What does engine error code P0253 mean for an 2000 Intrepid P0253 Injection Pump Fuel Metering Control "A" Low Only way to solve is visit the your Injection Service dealer. P0253Fuel Inj Pump Fuel ...

...injectors are working. If working, check fuel pressure at rail. If low, replace fuel pressure regulator (get back to me for instructions). If injectors not clicking, the powertrain control module is ...

...fuel injectors get clogged up by using the lower 87 octane gasoline that the impurities would slowly over time clog all your fuel injectors to the point that only small percentage amounts of gasoling ...

...a dodge intrepid 2001 what does code p201 mean and how do you replace the injector have trie lucas fuel injector cleaner but code still there and blinking when moving thats an injector code flashing ...