Questions & Answers for: Jeep fuel injectors

Question about 1989 Comanche

2 Answers

...fuel injectors, replaced o-rings...still have 1 leaking injector (2nd from rear of engine) Replaced ALL injector o-rings again still leaks. I did use lube on o-rings but I used lithium grease. Could ...

Ad

...fuel injectors o-rings? It is pretty standard on most vehicles it just depends on how many O-rings here is a picture an O ring on an injector. You can take a pick tool to remove the ring. The ...

Ad

Question about 1995 Grand Cherokee

1 Answer

fuel injectors disconnect the battery depressurize the fuel rail from the test port schrader valve unplug the injector clips one at a time marking them from front of engine # 1 - # 6 at rear of engine

...Fuel injectors To install: Install or connect the following: Fuel injectors, using new O-rings Fuel injector clips to the fuel rail Fuel rail Negative battery cable Start the vehicle and check for ...

Question about 2003 Grand Cherokee

1 Answer

...INJECTORS ELECTRICAL CONNECTOR,REMOVE FUEL RETURN LINE FROM INJECTOR, REMOVE FUEL INJECTOR HIGH PRESSURE LINE, REMOVE FUEL INJECTOR RETAINER AND RETAINING BOLT,THEN REMOVE FUEL INJECTOR FROM THE ...

Question about 2003 Grand Cherokee

1 Answer

my jeep wrangler 19901/2 isn't getting any fuel. we have replaced the fuel pump, sock, filter, injector, and rebuilt fuel regulator. have fuel pressure to injector fuel will not pass through ...

fuel rail injectors. you could google that or you tube it or read the FSM. hide call keys from step 2 on, or very bad things can happen. (wife or kids no aware of danger) ill just cover the (basics) 1

Question about 2002 Grand Cherokee

1 Answer

fuel injectors mechanic said fuel injector leaking gas mechanic got problems cant get him back ti fix has already taken apart things to fix was to replace bands or seals on fuel injectors need service

Question about 1994 Grand Cherokee

1 Answer

fuel injectors how to remove and clean fuel injectors You typically don't need to remove your fuel injectors to clean them. Have you tried using a really strong fuel injector cleaning product? Also if

...fuel injectors are to be installed, refer to Fuel Injector Removal/Installation. (2) Clean out fuel injector machined bores in intake manifold. (3) Apply a small amount of engine oil to each ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...