Reset Button When I plug into outlet. I press the reset button the red indicator light will show but when I push the test button the red indicator light comes off. What does this mean I have a Karcher
...did. You can always delete them later if you don't need them. :) Here is what you need to do: 1. Fuel selector off 2. Remove float bowl mounting screws and nut 3. Remove the BRASS Jet / Orifice in ...
...come back in 10 minutes does same thing. Checked tank and it is not plugged. Appears to have vacuum fuel pump. could that be problem? It sounds like the fuel bowl is not filling quickly enough. Turn ...
...and then it began billowing thick white smoke and stopped running? Any thoughts. white smoke IS NOT fuel related. you twit! white smoke indicates oil consumption. they let anyone answer ...
Question about 2500 PSI Pressure Washer
Karcher HDS 7/10-4M has the oil light giving 4 flashes, what does this indicate as the fault. as above Ive got a brand new HDS 10/20 and its crapped out on me already, water line filters were blocked,
pilot light will not stay lit you must test the light with multimeter and see if are broken or break bulb, or some loose wires, or bad contacts for corrosion, oxide,and clean it. However you must read
Question about LABEL, PILOT LIGHT HOLE, VNG
No fuel flow to nozzle fuel pump and fuel filters have been replaced and fuel solenoid magnetises The coupler behind the pump that connects to the motor might be broken.
...Try a new nozzle that is the right size for your machine. Motor pulsing usually indicates lack of fuel supply, remove the carburateur and clean the jets, clean the jet set pilot, clean the inside
Question about 2500 PSI Pressure Washer
...flashing on my karcher 7/10 Regarding this model, I am not that informed. But similar machines, it is an indication of water softener warning lights. If it is a fuel problem and machine is full of ...
Question about 2500 PSI Pressure Washer
...either the unit has been tipped on the side and the oil has entered the cylindeder, or dirt in the fuel has prevented the float valve to stop the fuel supply to the cylinder and the fuel has filled ...
Usually answered in minutes!
685 Questions
273 Questions
123 Questions
72 Questions
36 Questions