Questions & Answers for: Nissan Quest fuel hose

...fuel return hose clamp and slide it away from the fuel return hose connection. NOTE: Use a rag to prevent fuel from spilling while disconnecting the fuel tubes. Disconnect the fuel return hose at the ...

hose comes out of the motor near the fuel injection system, does a 180 degree turn and goes right back into the motor. It's about a 3/8" hose, maybe 5 or 6 inches long. It's been leaking water down on

...hose. Also, checked gast; it comes out of fuel line above fuel filter (pressure appears low). pressure should be 40 psi. change pump in tank if bad. go here for help ...

...line on.is it is low pinch the smaller or the 2 rubber hose alittle to see if it raises the pressure. if it does your regular is bad if it don't you got a leaking injector or fuel pump going

...fuel hose from the fuel filter (on firewall) driver side. the clamp to the fuel rail & injectors needs about one turn. Get long skinny phillips screwdriver to turn and one long skinny flat blade ...

1995 Quest Fuel Pump removal You have to drop the tank to replace the fuel pump. Take the exhaust down and then disconnect the hoses that you can see that go to the fuel Tank. you will need a Trans ...

...fuel intake hose between the fuel filter and the intake, and the van stalled, then pinched off the fuel return underneath that, and same thing. Is there a way to hook up a fuel pressure gage, and if ...

...fuel pressure with regulator hose connected and I have about 20 PSI. I disconnected the regulator hose disconnected and pressure does not change. What might the problem be? You might have a clogged ...

...hose at fuel tank. If there is an inline filter replace now will save time since you are already under car. Next pull old hose out and throw away. Last push hose onto mounts from old hose. If they ...

...fuel line when it is unhooked is no more than if you were draining gas with a gas hose really has no pressure to amount to much at all check for a blocked filter first. The fuel pressure should be up ...