Questions & Answers for: Harley Davidson FLHX Street Glide fuel gauge wiring schematic

Question about 2008 FLHX Street Glide

1 Answer

harley davidson flhx - fuel gauge not working, low fuel light on tank full bad sending unit for fuel gauge in tank

Ad

Question about 2008 FLHX Street Glide

0 Answer

fuel gauge on 2002 street glide work then doesn't , it kicks back and forth what could be the problem. Hi Eric_prior, you could have a faulty sending unit or guage, there could be a problem with your ...

Ad

Question about 2008 FLHX Street Glide

1 Answer

...fuel guge from a streetglide ? If the gauge is built into a "cap" on the top of your tank, it's held in by an 0-ring. Carefully wiggle the gauge side to side and pull up. The wires from the gauge ...

Question about 2008 FLHX Street Glide

0 Answer

rpm out oilpressure is out gauges don't work change 15 amp fuse itblows it out Hi Bills456, you have a hard/dead short that should be easy to find generally they are the easiest. Time to get out ...

Question about 2008 FLHX Street Glide

1 Answer

...fuel wants to stay runming but quickly dies out. Does anyone have a reliable wiring schematic to troubleshoot the system. With that gas gone bad may have plugged up the injectors..my thoughts ..for ...

...gauge isn't working and your oil pressure light is burned out, despair not, you still have one last line of defense left HYDRAULIC LIFTERS, as long as those tireless workers are quiet, you have oil ...

Question about 2008 FLHX Street Glide

0 Answer

...Fuel Gauge not working fuel tank is full, Gauge is stuck on empty Hi Anonymous, you could have a faulty sending unit or guage, there could be a problem with your wiring. On models with the fuel gauge ...

I need a wiring diagram with wire colors for the gauges on a 2007 street glide Im painting my inner fairing and like a dummy I didn't label which wires went where on the small gauges Hi ...

Question about 2009 FLHX Street Glide

1 Answer

Fuel gauge is pegged to empty on 09 street glide Don't know if it's the same routine, but here's the troubleshooting for a 2009 Road King: Disconnect harness from fuel gauge Turn ignition switch to ...

...fuel gauge reads full all time the gauge reads full even when it is empty When the ignition switch is ON the fuel gauge is connected to 12 VDC, current flows through the gauge and the variable ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...