Questions & Answers for: GMC front sprocket

Question about Yukon XL Road Bike

1 Answer

...wearing out now are likely the ones that are used the most. You will probably have to replace the chain, coggs,(freewheel), and maybe the front sprocket that is used the most refer to ...

Ad

...front passenger seat stuck in forward position The kids "adjusted" the passenger seat to its forward limit. Now it won't go back. The seat back rest still adjusts. Electric or manual??? If electric ...

Ad

...cant time it Hello Eagle. The timing is set by a crankshaft position sensor that is mounted at the front of the engine near the crankshaft. The computer sets the timing. But there is an adjustment

Question about 2001 Sierra 2500HD

1 Answer

...sprocket bolts; Torque to: 26 ft. lbs. (35 Nm) Oil pump NOTE: Do not lubricate the oil seal sealing surface. Lubricate the outer edge of the oil seal with clean engine oil. Lubricate the front cover ...

Question about 2001 Sierra 2500HD

1 Answer

...through the intake manifold. Inconsistent ignition timing or a clattering noise coming from the front of the engine. It is a good idea to replace the water pump (coolant pump), and the thermostat ...

Question about 2001 Sierra 2500HD

1 Answer

sprocket. NOTE: The composite type engine front cover and seal must not be reused. Always install a new engine cover with a new seal. Install new engine front cover and bolts. Torque bolts to: 106 in.

Question about 1993 Sonoma Club

1 Answer

...sprocket and the pinion gear (groove-side toward the front cover). Align the key groove with crankshaft key, then drive it into position using installation tool No. J-26587 or equivalent. Turn the ...

...front end engages and your gear selector fork moves your sprocket from 2h to 4h in your planetary in the transfer case good luck. I put my money on the shift encoder motor. I'm no expert just a ...

Question about 2002 Envoy

1 Answer

...sprocket gets too worn and the chain may jump a tooth, throwing off the engine timing and causing a rough running condition, but it is still rare. Your mechanic has the advantage of being there and ...

...front cover Oil pan Oil pump screen bolt and nuts Oil pump screen with O-ring seal. O-ring seal from the pump screen. Discard the O-ring seal. Remaining crankshaft oil deflector nuts. Crankshaft oil ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top GMC Cycling Experts

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66835 Answers

Kardoc

Level 3 Expert

7503 Answers

Tony Parsons
Tony Parsons

Level 3 Expert

6405 Answers

Are you a GMC Cycling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...