Question about 3.8 cu. ft. HE3t Front Load Washer
...front and top off washer. only water trail was small puddle below left shock mount (looking in) to tub front.and water pooled in the shock mount. only thing i could find wrong was the multi-ring seal ...
...front load washer shaking our machine is 12 yrs old. has been shaking violently for about 6 mos. last week it also leaked water. we are now fixing it and saw that the shock is broken. we were given 2 ...
...front load washer, right shock broken and leaking from drum How do i replsce the shock (looks a little tricky so any tips would help)? Should I replace both? Lesks from the drum - a seal because ...
Question about GLTF1240A Front Load Washer
...front load washer - Frigidare GLTF1240A This 7 year old, front load washer has worked perfectly and is still running great, with one problem. Water was noticed slowly leaking from under the washer. I ...
front loading washer bangs and clangs very loudly in the final spin cycle. It seems as though the drum is making contact with the sides of the washer. What is the cause? worn out drum bearings-mike It
Question about FTF530FS Front Load Washer
water leaking from below the tub. THe right shock water leaking from below the tub. THe right shock base has some water. Looks like the water is coming below the tub. Is this fixable? Yes it is the ...
...I found that the shocks that hold the tub were bad... Check out this tip I wrote about the noise and vibration that front load washers can make.. Washer Problems Washer noise when spinning ...
Question about Duet GHW9150P Front Load Washer
...washer duet....leaking...ifound two front shock absorbers not conected in front drum.....I also found front bellow door seal ripped...I guess replace 2 absorbers than door seal will solve probelm? ...
Question about W6221 Front Load Washer
...front-load washing machines have shock absorbers that are used to dampen the tub movement in the spin cycle. The shock absorbers or struts are attached to the base frame and to the outer tub and you ...
...front-load washing machines have shock absorbers that are used to dampen the tub movement in the spin cycle. The shock absorbers or struts are attached to the base frame and to the outer tub and you ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions