Questions & Answers for: front camber

...camber on passenger side front wheel and positive on front drivers side... mechanics say that there is no camber adjustment on this vehicle.. Is this true, is there a way to fix my problem? there is ...

Ad

Question about 2001 Excursion

1 Answer

...ford excursion what causes camber ? where can I get a manual to fix this and or other front steering problems camber is a front end alignment adjustment must have a front end machine to adjust ...

Ad

Question about 2001 Excursion

1 Answer

outer 2" of front tires outer 2" of front tires wearing fast CAMBER PROBLEM... IT IS CALLED POSITIVE CAMBER.. BRING IT TO SHOP FOR CAMBER CORRECTION.

...camber BUT is at the Front and Rear edges of the front wheels. (Think of your own feet. toes in, / \. Toes out, \ /). That hit you mentioned to the left side of the car might also have bent something ...

Question about 1997 Civic

1 Answer

front camber -0.5 & -0.5; camber 1.7 & 1.7; toe 0.00 & 0.00; total toe 0.01; steer ahead 0.00. Rear camber -2.1 & -1.4; toe 0.11 & 0.08 total toe 0.19; thrust angle 0.02 If the car

...front wheels.. camber is off on both tires. mainly the drivers side. Is there any way to adjust the camber without taking it to a professional, or buying camber adjustment bolts? any help is ...

...Front Camber is too agressive, is there anyway to prevent excessive tire wear that is due to negative camber being too large? The front tires are wearing on the inside shoulder due to negative camber ...

Question about 1987 Astra

1 Answer

...camber on the front passenger side wheel No, you don't need 15 degrees of negative camber. Most typical specs for camber on the front of a car are between 0.0' and ~ -2.5'. Note: Cars with -2.0+ ...

...camber on the front suspension of a 1989 nissan d21 pickup truck http://www.bing.com/videos/search?q=adjust+the+toe+camber+on+the+front+suspension+of+a+1989+nissan+d21+pickup&FORM=HDRSC3 ...

...camber. Left front has neg camber after riding over an open drain. I tried fitting a new upper control arm. All shims are out You will need to have your vehicle put on an alignment machine to have ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...