Questions & Answers for: frigidaire oven door hinge problems

...OVEN DOOR SPRING I HAVE A FRIDGIDAIRE GAS RANGE AND CANNOT USE THE OVEN NOW BECAUSE A SPRING ? ON THE LEFT HINGE HAS SLIPPED OUT OF PLACE AND THE DOOR WILL NOT CLOSE ENTIRELY. PLEASE HELP!! Replace ...

oven door will not fully close. no noticeable obstruction. Self cleaning lock not stopping the door either. Oven is level. any ideas what it could be? 1. Take all racks off and try to close the door 2

Frigidaire smooth top oven. Oven door will not close completely and the oven light is on 24/7. Any suggestions? Check the gap on the side of the door. Most likely the top will be wider than the bottom

oven door would not stay closed all the way. I ordered new hinges, replaced them and it was great for 11 months. Still under warranty, I replaced them a second time... but this time they only lasted a

Frigidaire Gallery Oven Professional Series, I don't have the model number. In trying to self clean my oven, I accidentally pressed something that engaged the oven door lock. Now I can't close my oven

...a new oven? Is this a problem with this particular oven? Generally speaking, it is possible to replace the door hinges on the majority of ovens be they gas or electric. Please leave feedback.

...frigidaire oven and the right hinge is out off the groove it rests on the door is croojed and i cant get it to its groove Basically, oven hinges more or less work on the same principle. However, they ...

...instructions on replacing the oven door hinge on Frigidaire, Electrolux, Gibson, Kelvinator, Tappan, and Kenmore gas ranges. Door Hinge Replacement part 316456302 Frigidaire Gas Range ...

door fix sagging frigidaire microwave door Hello Rick, thank you for your inquiry! From my understanding you need to fix a door that is sagging on your Frigidaire microwave. Your door could be sagging

...Frigidaire microwave door is sagging and about to fall off I appreciate your post, Wayne! From my understanding your Frigidaire microwave door is sagging and about to fall off. This could be an issue ...