Questions & Answers for: Ford Ranger freon goes 2000 truck

...warm air Check or have your compressor checked to see if working, have refrigerant filled Lack of freon or too much freon in the system could cause the compressor to cut off. If you put enough

...freon,it would have to be,most likely the ac clutc going bad.Try this,turn ac on and when ac clutch goes off,be ready,and don`t get hurt,tap it lightly with a tool or something,but be carefull!.If it ...

truck's a/c system. There are about 454 grams per lb. of matter and each can is about 12 oz. (not 16 oz. = 1 lb.). 3 cans would be 3 cans x 12 oz. = 36 oz. or about 2 lbs. 4 oz. If you round down to 2

where is the freon line located for a 2002 ford expedition look for a oval tank it should have a site glass,look for the aircobitionner compressor look for alum color lines (silver) now look for ...

...2000 ford ranger xlt, windshield wipers and speedometer don't work wooo hoooo i hate these trucks everything that could go wrong with them does just wait till the fuel shut off switch goes out real ...

...2000...i would like to buy my own engine and have somebody else put it in....whats a fair price and engine goes in it...all i have is a 3.0l long block I would have the dealer do it that way it will ...

A/C BLOWS WARM 98 RANGER You need to check the freon level and if that is good check the compressor. If you have no pressure on the low side, when I say pressure on low side I mean vacuum, then most ...

...GOES HOT TO COLD AIR AIR CONDITIONER BLOWING HOT AND COLD AIR ALMOST EVER 3 MINUTES. FREON IS GOOD Could be a blockage in the ac system, or a blend door problem. The first thing to have down is have ...

...freon in it and told me to come back in 3 weeks to measure the amounts and perform a dye test to find source of leak. The truck has 199,000 miles on it and I'm not sure it's worth replacing ...

...it usually is the low pressure cut-off switch. Before messing with this switch, verify what your Freon pressure is. If the pressure is low, the low pressure switch may be fine and you need to add ...