Question about Chevrolet S 10
...amount of 134a freon, but I only works when I put a jumper in the low side switch. Then the compressor will turn on on. My compressor USED to turn on by its self recently, but not now. replace comp ...
...and gauges for r-134 freon, wrenches for the retaining bolts. make sure you weigh the oil from the old compressor so that you can return the same amount. check you thermosat make sure its ...
...amount of compressor oil in the system when you changed the parts. The freon will hiss out, but the oil will settle to the lowest point. If you have access to really dry compressed air, you could try ...
...amount of freon in the system. It has a pressure switch on the (usually on the drier) lowside. If your are low on freon it will not come on. You can try to see if there is freon with a set of ...
...amount drained from the old compressor, plus 3 oz. for the accumulator. Freon charge would be around 36oz or 3 cans. You would put in 2 cans and then add until the pressure readings are within
Usually answered in minutes!
1,473 Questions
904 Questions
790 Questions
747 Questions
686 Questions
