Questions & Answers for: fork trucks

...unless the clutch is pushed in. any ideas??? chances are the adjustment of the throwout bearing fork is the problem . because of vibration that is the rattling that you are hearing. correct ...

Ad

How to take apart an inner tirod end passenger side for 2002 dodge caravan ? Use a tie-rod 'pickle fork'. Brace the tie rod with wood against a solid surface, use the pickle fork to remove the tie rod

Ad

Question about 1986 Pickup 4WD 1986

1 Answer

...Nissan Pickup It is stuck in gear but gear shift seems to be in the neutral position. HELP... Shift fork may also be one of the reason! watch the shift fork while moving the clutch in and out. 1)The ...

...trans has no reverse stuck in 2nd gear If this is a manual (5 speed) - you may have a broken shift fork. You'll want to either replace just the shift fork, or (best) - purchase a clutch kit for the ...

throw out barring fork doesnot allignment with clutch slave fork too short Did it pop out of position or what? Or was this after you replaced the clutch or what? Well on clutch forks ive seen. There ...

how much can you tilt a forklift's forks on average? how much can you tilt a forklift's forks on average? It depends on the make and model of the fork truck, but on average you can tilt ...

...trucks have forks that are easy to manually move. Just lift up the pin that is holding the fork in its groove, and put it in the groove where it will work best for what you're doing. don't forget to ...

Question about 2000 Mustang

1 Answer

Clutch fork Replaced clutch, cable, quadrant and added firewall adjuster and still have tremendous cutch fork vibration. did you replace the throwout bearing with the clutch ? if so, then it could be ...

Question about 1994 Civic

1 Answer

install clutch fork easy way to change clutch fork No easy way-no shortcuts. The transaxle has to be removed. The fork is attached to the clutch release bearing which is on the transmission's input ...

Question about Motor 2004 Accent

2 Answers

release fork the release fork is not staying connected feels loose how to fix You have to remove transmission to repair Sorry but if the fork is lose you need to remove the transmission and replace ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...