Questions & Answers for: ford focus throttle position sensor replacement

...ford focus surges when i come to a standstill sometimes this is so severe the rev counter reaches 2500 revs and then other times just dies could this be my airflow meter needing some tlc or maybe ...

Ad

...Focus and when driving car is great but as soon as I depress the clutch the revs go sky high 4000ish RPM ! I've taken off the inlet manifold cleaned put back with new gaskets including the throttle ...

Ad

how do I replace the throttle positioning sensor on a 2003 ford focus it just screws on ,but my assistant seems to think you have to buy a full air intake casing

...ford focus · The throttle position sensor (TPS) is located on the driver's side of the throttle body · Remove the plastic engine cover to access the throttle body, then locate the TPS. You may be ...

Question about 2000 Focus

2 Answers

ford focus runs rough , high idle, and want keep running in park Check pcv hose from intake to pcv valve. Check while running, they will collapse and leak I had the same problem. So that you don't

...ford focus has poor acceleration off idle, sounds lean Have replaced plugs, wires, throttle position sensor & fuel filter. Compression is good, cam & crank sensors test good, Key on fuel ...

...ford focus look like I suggest you google 05 ford focus throttle positioning sensor. This sensor keeps you air intake throttle at the proper position when the engine is cold and changes position when ...

...ford focus 2.0 with a etb scanner says throttle stuck closed AND throttle stuck wide open, accel pedal completely inop. car has no throttle what so ever but sits there and idles just fine You will ...

...ford focus se sedann idle to high replaced idle control valve and throttle position sensor How high is the idle? Any roughness? Some ideas who by the control the butterfly valve on the throttle, or ...

Ford Focus 2.0L The throttle body bore must be spotless. It tends to build carbon at the chamber where the throttle plate touches at the fully closed position. After you solve that cleaning issue, use

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...