Questions & Answers for: ford focus indicator bulb replacement

...Ford Focus LX My high beam headlights are stuck in the on position. If I pull the high/low switch, they just stay on high beam, and the blue high beam indicator light always stays on. I have replaced ...

Ad

...Ford focus c max to replace the bulbs. I have followed the instructions in the book i.e. I have loosened the screw st the top and the two clips at the bottom hi you will find there is a small bracket ...

Ad

...indicator not working, replaced bulb but still nothing, when turning right front and side indicator blinks twice as fast as usual? if you're sure you've replacd the bulb with the correct one, i would ...

...Ford Focus. Left front signal blinks fast, no left rear signal. Mechanic said, "there's a circuit board in the back that may need replaced?" I replaced the bulb, to no avail. Fuses are fine, I'm ...

...indicator stoped working but globe is OK . No power is getting to the globe. The dash and front indicators are flashing fast. Its a 2006 focus auto never smashed touched or modified. I'd be very ...

Question about 2004 Focus

1 Answer

...ford focus 2004 1.6 hatchback started clicking faster than usual when indicating left signifying a problem with the bulb. I replaced the bulb but still the same problem. If it was a fuse issue would ...

Question about 2006 Focus Tailgate/Trunk Lid uk73594m Hatchback 5 door, heated glass, Without spoiler; Coupe 3 door, heated glass, Without spoiler Orlando, Florida

1 Answer

...ford focus) 1. Remove the bulb and check to make sure the brass contacts are not corroded (green color/white). 2. You MAY have got a bad replacement bulb. Happened to me at AutoZone... 3. Your next ...

Question about 2003 Focus

1 Answer

...fuse as a replacement. If the fuses, wiring, wiring connections and bulbs are all fine, but non of the indicators are working, the likely problem is a faulty indicator switch on the steering

...Ford Focus, rear L fog reversing light not working took it out replaced bulb, (single filament indicate bulb). Reverse light works, fog light does not work, voltage getting to other three lamps? You ...

Question about 2003 Focus

1 Answer

...Ford Focus and my left headlight went out. I replaced both headlights and now my high beam indicator is on when it is low beams and are very dim. I have tried several different bulbs and the problem ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...