ford focus my engine light came on my ford focus 02 cl. but car runs okay whilst driving but seems to pull when driving, what is the problem first have your vehicle scanned. get the code #'s post them
...ford focus the wheel that needs to be adjusted because the alignment seems off and the wheel is tipped in to much. Too much camber?? How can I fix this as inexpensive as possible. steering wheel is ...
focus pulls to left after being hit in right rear tire.It was a slow speed hit and no body damgage. Could it just be out of aligment of more serious problem Yes this is an alignment issue. Even though
...ford focus with a 2.0 Ford Focus 2000-2005 2.0L 2.0L (VIN P) Engines Fig. Align the timing marks before removing or installing the timing belt-2.0L (VIN P) engine Fig. Crankshaft alignment ...
ford focus feels unsafe and not holding road properly Alignment keeps going out and drives as though there's a buckled wheel, which has been checked out - also the tracking has been done to death but ...
Question about XPS M1210 Notebook
...Ford Focus ST170, 3 Door, 2003 Model. I have a problem with my Ford Focus ST170 steering. Everything was fine until 3 weeks ago, when all of a sudden one day I started to drive the car and the ...
...ford focus? can you time the engine with out the special tool? its a dual overhead cam Click on the following direct Link. With the DOHC you will need the Camshaft Sprocket Holding Tool and Camshaft ...
...Ford focus 2004 zetec 1.6 There is a spring that holds the light bulb in place,witha screw for adjustment. It's a nightmare to work on,trust me,I have an 04' Focus with the light still pointing up, ...
...ford focus with a 2 liter zetec engine cant find the timing marks No marks to align camshafts, set crankshaft at TDC, align camshaft as shown, to align, lobs on cylinder #1 have to be pointing out at ...
Question about 2002 SVT Focus
...2000 Ford Focus that keeps throwing bearings even after an alignment and new tires. Would a wheel bearing hub assembly from a 1999 ford escort 2.0 fit? What is the problem bad bearings? bad
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
