Questions & Answers for: ford escort airbag

...escort The airbag waring light is flashing 3 times then 2 times and then starts all over again Dear Customer, you have to check your SENSORS AND WIRING THAT ITS WORKING BATTER OR NOT,SO YOU HAVE TO ...

...Ford escort my airbag light in my 1998 ford escort stays on constantly and i have replaced my battery 3 times and they die within 3 days. I have had the alternator tested and it was fine. What could ...

Ford Escort wagon air bag light blinks when car is runnning You can have the airbag light tested for the trouble code that is making the light blink, the most likely cause is the rotating contact that

...ford escort with one from a junkyard, the airbag was deployed so I put the one in from my old column and now the airbag light flashes and the horn doesnt work. How do I fix this so the horn works and ...

...Ford Escort The airbag light flashes sometimes and just tonight heard a beeping sound as well. Then it stopped and the airbag light stablized. there is a malfunction in the srs system. the flashing ...

...ford escort 1.4 Common fault on FORD Usually due to a poor connection in the YELLOW PLASTIC CONNECTOR underneath the passenger seat. Just push it together properly and it should clear the AirBag ...

...Ford Escort SE repair costs? I have a 2000 Ford Escort SE and I recently was in an accident. When the airbags deployed my windshield was cracked on the passenger side. I was wondering how much would ...

...ford escort zx2 There is no separate sensor. The airbag module has an inertia sensor that determines if the airbag is deployed. The module is in the center of the dash area, mounted to the floor. ...

Airbag code 32 fix? Had airbag computer checked, replaced deployed airbags, checked Clock Spring connectons, checked fuses and checked seat belt tensioners If you replaced the airbags, it might be ...

...ford escort wagon.my airbags were deployed and I got car fixed accept for airbags. How do I get beeping noise to stop. Thanks Wes Remove the chime module. Locate the module by sound and disconnect ...