Questions & Answers for: how to use foot switch

Question about Dictaphone Audio Players & Recorders

2 Answers

...foot control. There are 2 screws underneath each switch. Loosen up the one closer to the front of the pedal (just a little) and tighten the one in the back the same amount. This will raise the angle ...

Ad

Question about 2005 FXSTD - FXSTDI Softail Deuce

1 Answer

...foot brake switch. If brake light is till one, then problem is elsewhere. If brake light is off, then the foot brake switch needs looking into. Often found faults is mis-adjusted switch. The switch ...

Ad

Question about 2005 FXSTD - FXSTDI Softail Deuce

1 Answer

...on rubber foot switch. Can I get a new on off switch and how much and from whom? Are you sur this is not safty feature, just a suggestion..so dont hate me...can not find a swith on internet Please ...

Question about Sr 16 Stereo Drum Machine

2 Answers

...foot switch for this machine. I need a foot switch for Alesis sr-16 drum machine. I emailed Alesis; no reply. Any suggestions? What you need is 2 unlatched switches 1 for the stop start function and ...

...foot-switch, nothing happens when stepping on either switch. I've lifted the front of the head to about a 45' angle and the foot-switch activates Crunch with either switch as long as my foot remains ...

Question about AS-2300 PC Transcription Kit

0 Answer

...foot switch stopped working. We have the Olympus AS-2300 transcription software installed on our computers using the RS25 foot switch. For some users, the foot switch stopped working. I swapped the ...

...foot switch is set to toggle Leslie effect between fast and slow. How do I change it to act as damper sustain pedal or other function such as glide? Thre is a sustain pedal jack next to the foot ...

...foot switch fully open with a hand or hands, then turn on machine to see if problem goes away. If problem goes away, then likely its the foot pedal, but could be all that is needed is cleaning the ...

...foot switch on your Ampeg GVT52-112 amplifier. Since you've already confirmed that the foot switch is the correct model and cable type, and cleaned the input jacks, here are a few additional ...

...a switch that tells machine foot padel is engaged or not. Confirm that switch is working properly. For your help visit following link for service manual. Singer-9910_9920_9940_SM.pdf

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

SmartAviator
SmartAviator

Level 3 Expert

1124 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you an Audio Players & Recorders Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...