Questions & Answers for: Yamaha XJ 700 S Maxim float setting

Question about 1985 XJ 700 S Maxim

1 Answer

Carb problem I cant seem to find Carbs for this bike. I need to, is there anyway to use 750 carbs on a 700??? i have an extra set of carbs, you can e-me @ [email protected]

Ad

Question about 1986 XJ 700 S Maxim

1 Answer

how to set headlight aim on xj 900s diversion where is the adjuster to drop the beam lower down?? i think there is a slot under and behind the light casing

Ad

Question about 1985 XJ 700 S Maxim

1 Answer

Need to set floats on an xj 700 How do i set the floats on a 1985 Yamaha xj 700N Maxim? with the float bowl off and holding the carb level, adjust the float where it is level and the jet is up enough ...

Question about 1985 XJ 700 S Maxim

1 Answer

where can I buy plug spark wires set by internet any where that sells auto parts as you just cut them to size you need & fit to colis & plug terminals Cheers rob

Question about 1985 XJ 700 S Maxim

1 Answer

Carb prob. What are the float settings and air screw settings for this bike.. Thanks plz visit this site http://xjbikes.com/Forums/viewtopic/t=2908/highlight=float+setting+air+mixture.html

Question about 1985 XJ 700 S Maxim

1 Answer

...where to drill for this screw. I don't know what to look for. They are on the side just above the float bowl, they are sealed with

Question about 1985 XJ 700 S Maxim

1 Answer

...my bike. Didn't even start it and it was leaking gas out the overflow tube. Is this a problem? The float may be stuck in the open position...you can try tapping on the bottom of the carb to see if

Question about 1985 XJ 700 S Maxim

1 Answer

how to set carburetor on 1987 yamaha xj 700 s maxim Not sure i understand what you mean by set, if you have more than one carb and you want to set them together, or synch them. you need a special ...

Question about 1985 XJ 700 S Maxim

1 Answer

engine wil not run and smelths patrol it sounds like the carb floats stuckand check plugs

Question about 1985 XJ 700 S Maxim

1 Answer

...float should swing freely on its pivot shaft.  The needle sometimes has a spring loaded plunger in top that should freely move back and forth when pressed with the finger and if not replace ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...