Float setting for BS34ss carb I need the procedure and measurment for float in my 1980 Suzuki GS450 with BS34ss carbs I have a set my float to 22.0 +- 1.0 for a Mikuni carb. To set floats, drain the ...
need float setting for 1979 GS750L suzuski motorcycle call a tech at a dealer and he will look it up--some mc salvage yards have info too
i have a 1983 suzuki gs 400 e and cannot get it to run i think its the timing and would like any info on how to time it G'Day jesse, This model GS has electronic ignition, so there is not much to ...
Hello, i have a 1980 Suzuki GS 450. i think my timing is off because it will only run with the choke on. if my timing is off how do i set it, and if its on already do you have any ideas about what it ...
...like you may have to rebuild your carbs. This could mean just removing the carbs, removing the float bowls and cleaning out the jets and float valves. It may however require the purchase of a ...
...in one of these positions. As for the specific cause, it sounds like one or both of your carb floats may be sticking in position, preventing the fuel shut-off needle from seating correctly.
hello ,i have a 1981 GS400(not E) with a prominent engine rattle/knock wich appears to be sounding from within the head area but only when engine warm and audable whiles shifting gear and feathering ...
i'd like to know the gapping specs - geez, you cover everything else ... '78 gs 400 x Points settings: 0,35 mm / .014" point gap. Spark plug type: NGK B8ES
Hello I have a suzuki gs 400 ,timing good compression good new battery carbs have new floats ,needles and diaphragms it idles well but when on the road over 3000 rpm the bike has no power and ...
Usually answered in minutes!
15 Questions
12 Questions
3 Questions
