Questions & Answers for: Harley Davidson FXR Super Glide float setting

Question about 1993 FXR Super Glide

1 Answer

1979 Lowrider shovel rear brake calipers rattle Banana calipers I think they call the set up, very loose & noisy rattle or recommend replacement set up as brakes are very poor. Both front and rear

Ad

Question about 1993 FXR Super Glide

1 Answer

1977 FX super glide with S&S carb. At idle carb spits. Seems like dwell angle is off. How can I set the dwell on points and timing? Between determining which heat range on plugs book says set ...

Ad

Question about 1993 FXR Super Glide

1 Answer

what is the float adjustment on a 1991 fxrs low rider convertible Is the carburator a stock Kiehen or some other aftermarket carb? If it's a stock Kiehen, the float must be set with the carburator on ...

Question about 1993 FXR Super Glide

2 Answers

...long. I have gotten a new fuel petcock, filter, fuel line, needle and seat, I have made sure the float is set right and the tank is venting. I have also installed the fuel bowl extension. Nothing ...

Question about 1993 FXR Super Glide

1 Answer

...my harley gas and oil pour out my breather tube I call this puking [oil] .. gas may be a stuck float if carberated..tap on bowl lightly w/ a screwdriver handle, or drop bowl & clean. turn ...

Question about 1993 FXR Super Glide

1 Answer

how to set pionts on a 1340 77 harley Raise the rear wheel of the bike off the ground, shift the transmission into fourth gear, remove the spark plugs and bump the rear tire in the normal direction of

Question about 1993 FXR Super Glide

1 Answer

...to the idle port of the carb is stopped up. If you're still running the stock carb, with the float bowl off, look at the main jet that is screwed into the main jet holder. Off to one side

...visit the websites below. Good luck and have nice day. Harley Davidson CV Carburator rebuild and float adjustment ep 18 eng Roma... Harley CV carb mod CV carburetor tuning part 2 Mixture screw ...

...the venturie & the overflow If I had a diagram,I could probably fix it(hopefully it is a stuck float) Hi Anonymous, check for a cracked float (fluid inside float), trash between the needle and ...

Question about 1993 FXR Super Glide

0 Answer

...gaskets that will have powder burn like residue at the exhaust port. Check the carb for proper float level and make sure jets and air passages are not blocked or clogged and check for water in ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...