Questions & Answers for: Jeep Wrangler float setting

1991 jeep wrangler, gas tank empty, put 5 gallons of gas the guage is showing full thank, any one knbows what the problem maybe and how to fix it?. sounds like your fuil pump float is stuck

...them yourself? The only thing other than an external leak that could cause this is that the float level is set too high causing spill-over and flooding, or needle & seat being obstructed and ...

...related. There is too much fuel entering the engine. If your vehicle has a carburetor, check the float level and needle valve for leaks.(also make sure the float actually floats...some develop ...

...as the engine turns. If it does, then the entry port on the carburetor is plugged. Remove the float assembly and pull out the float needle valve. Hook the fuel line back to the carburetor and ...

gas gauge floats and will never tell accurate amount of petrol in the tank replace with new

the right track. could be needle and seat leakage (both included in rebuild kit), or maladjusted or saturated float. later more likely. float is separate part from kit. setting will be provided in kit

how do i fix my 89 jeep wranglers float in the carberater? Carburetor floats are adjusted (if needed) when the unit is rebuilt. This is not a normal maintenance item and it is unusual for a float to ...

...but instantly floods the carb with gas. Why and how do I fix this? Sounds like a stuck or defective float.(perhaps a hole in it). Also check the needle valve for operation and if its installed ...

fuel gauge not working in on jeep wrangler 1997 Bad float on the sending unit.

gas gauge reading wrong One of two things: either the gage itself is malfuntioning or the float/sending unit in the gas tank is failing. Disconnect the plug at the tank for the sending unit, pick up a