Questions & Answers for: Honda float setting

Question about 1982 VF 750 S

2 Answers

...float level setting recommended carburettor float level setting Usually if the float is adjustable you will set it so if there is a flat surface on top or side of the float it will be parallel with ...

Ad

how to set the floats on 1980 honda fcivic how to set the floats height on 1980 honda civic YOU CHECK FLOAT LEVEL LOOKING AT THE SIGHT GLASS ON THE RIGHT OF THE CARBURETOR.FUEL LEVEL SHOULD ALIGN WITH

Ad

Question about 1987 CBR 1000 F

1 Answer

...float is parrellel to the carberator's metal flat body section. This setting will provide the proper fuel level in the carb providing the proper maintained level of fuel for performance around tight ...

Question about 2004 CR 250 R

1 Answer

...setting, so are usually left alone. The float needle has a neoprene tip, that isnt going to wear into the seat, and a spring tip on the other end, so they dont change. Usually if the bike floods, the ...

Question about 1990 Pacific Coast

1 Answer

Upon starting, left float bowl leaks fuel onto floor. What is float level; I do not have a gauge. the float level is set with the carb on the bench float should be level with carb body above needle ...

Question about 1990 Pacific Coast

1 Answer

...setting the float level be aware that the spring loaded bumper on the fuel inlet needle valve may have a tendency to compress under the weight of the float assembly which will skew your measurement. ...

Question about 1988 GL 1500 Gold Wing

0 Answer

...float setting for 1988 GL1500? Per Clymer, it should be set to 0.31 which is higher than the setting when disassembled. Does float setting take into consideration the ridge on float or should setting ...

...setting the float level be aware that the spring loaded bumper on the fuel inlet needle valve may have a tendency to compress under the weight of the float assembly which will skew your measurement. ...

Question about 2004 CRF 450 R

0 Answer

...Float Level Setting the float height the easy way http://www.cyclechaos.com/images/d/d6/Honda_GL500_GL650_Service_Manual.pdf http://www.partsfish.com/page/oem-parts-for-honda ...

...float level setting. This is a critical setting and must be set as accurately as possible according to manufacturer's specs. It is accomplished by bending the tang of the float which will control how ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...