Questions & Answers for: Panasonic TH flex circuit

...connects to the side PCB's. Clean the flex and re-insert, if that does not help, it is possible for the flex to have and open circuit, for the side PCB's to be faulty or even the screen to be

...thanks Les Capstick disconnect the x and y sustain boards from the power supply. then check the flex connector to the screen and reseat them. check connections on c boards at bottom and screen ...

frozen screen on plasma TV Our Panasonic Plasma TV is less than a year old. It freezes on the HD channels. Problem in that we purchased it from Circuit City. What can we do? If you purchased it with a

TV clicked and went blank...no picture, no sound. Power light blinks ten times in one second intervals and then pauses for about five seconds. Most problems with TV not turning ON is a power supply ...

black vertical band on left side black vertical band on left side There is a good chance that the plasma panle may have become faulty, but another cause of this is a faulty X-SUS Printed Circuit Board

...power supply from sus boards on sides before attemting to disaconnect connectors from c board to flex cables. arc from stored energy on power board will burn cables. reseat the connector closest

...width? Where on the screen are they located?Connections on the c boards at the bottom to the panel flex cables or bad c board itself can cause 2 inch wide verticle bar. Before touching these ...

solid 2 inch black line from top to bottom Your tv has a vert. circuit that controls your pic from top to bottom.It also has a circuit that controls the pic from side to side.Your horiz.(side to side)

My tv powered itself off and won't turn back on There should be a short circuited printed circuit board inside the TV, which causes short circuit shut down. Contact any service technician. This is not

Panasonic TH-50PX60U powers on but no picture Check the led circuit if you have sound. Inverter circuit or led themself. Good luck. Serge.