...flex circuit coming off the display is very, very delicate. Remove all screws around the camera body (6 of them)and very carefully pry it apart. The top snaps in place. Remove two screws from the ...
NO FLASH I LOVE THIS CAMERA!...HOWEVER, I DROPPED IT AND NOW THE FLASH DOES NOT WORK. IT STILL TAKES BEAUTIFUL, CLEAR PICTURES OUTSIDE BUT DARK PICTURES INSIDE. HOW DO I FIX IT? HELP THANK YOU IN ...
...circuit- that carries a signal to the LCD? If not, then is there any way of replacing the ribbon? And this would be my last choice, but if someone were willing to sell a S800 LCD screen to me from a ...
...flex circuit connector first by lifting the small black lever(that runs the length of the connector) and gently pull flex connector straight back. I work on small instruments so I'm used to this kind ...
...I zoom in the picture there are horizontal lines on it. A technician from our place said it's the flex cable for the zoom that has the problem. I want to know the cause for this problem. Anyone who ...
...not do a damn thing. any help would be appreciated. i dismantled the camera, unpluged all ribbons (flex connecters) and cleaned all connect points with a pink pearl eraser. re-assembled and it
...Had same problem after 2 years. Took it in to a repair shop & they installed a new camera flex. Its working OK
does it use battery only or charger I was wondering if I could charge the camera with a usb wire...or does it take only battery. Hi, It depends on the Model of the camera. Few camera's do have that ...
Question about Digimax A400 Digital Camera
smasung a 400 camra was dropped in water, now it was dried out, but stillcan not take picture,wh? please help Sounds like you tried to turn it on while water was still inside and fried the circuits.
my camera imeging butn is not pressing Hi, Circuit board problem with your camera and suggested to fix it at dealer. Regards, Jay
Usually answered in minutes!
444 Questions
436 Questions
362 Questions
283 Questions
151 Questions
