...lite was flashing. 10 minutes later I turned it back on and it worked. The next day same thing happened, but now it wont turn on anymore. I just replaced the lamp and now the power lite flashes green ...
red lite tv works for about 1 minute but red lite flashing, then tv goes off, is it over heating? Thank you Unplug tv for 30 minutes plug back in and power up to reset it..
Question about Viera TH-50PZ80U Plasma TV
power lite blinks 10 times. no pic no sound. cant turn on or off i left tv on and came to room and the power light is blinking in 10 flash intervals. no picture no sound. cannot turn on or off ...
Question about PT-50DL54 50" Rear Projection HDTV-Ready Television
lite keeps flashing. Help TV has very little use remove back panel. blow out all the dust from all the components except the fan on the right. Vacuum out all the dust. Have you replaced the lamp? that
flashing lite on all handsets can't be shut off; flashing lite on all handsets can't be shut off; no messags all fully charged Yes you can go to settings menu and can switch off the backlight, this ...
Question about PT-50LC14 50" Rear Projection HDTV-Ready Television
THEN SEEN HAS A LITE GREEN TINT TO THE BOTTOM PART THE SEEN HAS A LITE GREEN TINT TO THE BOTTOM PART OF THE SCREN BUT DOES NOT AFFECT COLOR ON PICTURE. ONLY WHITE AREA OR VOL BAR.I CHECK LAMP IT LOOK ...
Question about PT-50LC14 50" Rear Projection HDTV-Ready Television
My Panasonic CT32HC14J will no come on the power light on front of unit just continues to flash red.Also I hear a click and the light goes out what could be the problem I had the same problem, The ...
Question about PT-50LC14 50" Rear Projection HDTV-Ready Television
it shutts off ramdomly the red lite blikes an have to what for green light to come on before it turns back on Tv "LAMP" LED lite indication flashes or staying on?The tv projection lamp life is ...
Question about PT-50LC14 50" Rear Projection HDTV-Ready Television
panasonic pt-61lcx35 lamp lite flashing 3 times every 5 seconds and does not power on hi there.most probable you need a new lamp..remove the lamp to see if it has shattered. best wishes, steve
Question about Viera TH-50PX80U Plasma TV
13 flash error code----communication error dg board with ic 8001 pesks lite 2. What does that mean and how do you fix it? bad board and needs to be replaced.
Usually answered in minutes!
627 Questions
462 Questions
520 Questions
406 Questions
457 Questions