...for minolta if its compatible to use it for a sony a100? thnx! Hi, The Alpha 100 only supports pre-flash TTL and ADI flash control which are not supported by the Sunpak. The flash should ignite, but ...
sunpack 544 flash sunpak 544, charges but will not flash There can be more than one reasons for that. 1. Broken wire at sync terminal. 2. Electronic sync issue: 2.1. Faulty sync thyristor (CR02). 2.2.
...Howard The Rebel XTi has a sophisticated communication protocol between the camera and a dedicated flash. Only ETTL-II capable flashes can benefit from all the features the engineers at Canon thougt ...
sunpack pz40X II flash - compatible with Nikon D40? I ordered the flash, being told it was compatible with "all nikon TTL" cameras. When I got the flash, the box indicated it was compatible with "D70,
Question about PZ 4000AF for Canon TTL Flash
Need manual for Sunpak 4000AF Power Zoom Flash Regarding using the Sunpak 4000AF flash with my Canon EOS Digital Rebel, I can't get the flash to fire. There seems to be no combinations of settings ...
Question about PZ 4000AF for Nikon TTL Flash
Will my sunpak PZ4000 flash trigger voltage harm my nikon D50 circuitry? The Sunpak PZ 4000 and 5000 were made for film cameras. I have one for my EOS film cameras. It works just fine. I know this ...
...D compatable with my Canon T2i Camera? This is a yes and no answer. I personally would not use his flash on any of my digital cameras due to not knowing the "Trigger Voltage" one shot out of this ...
I recently bought a Sunpak 544 flash to use on my Canon Rebel but with the camera & the flash set to automatic all my pictures are washed out. I can get decent photos with the flash head set to 90/90 ...
Where can I buy spare parts for sunspace pf30x The shoe part has broken where the 4 screws hold it in appliancepartsresource.com/appliance_repair.php?id=81 ????????????Not sure
How do I use this flash as a slave? I have tried to fire the flash from my camera's internal flash canon 70d and with an external canon 580 EXII as a master. It will not fire. You need to set the ...
Usually answered in minutes!
13 Questions
16 Questions
12 Questions
17 Questions
1 Questions