my 93 grand cherokee leak in powersteering pressure hose.How do you change hose? Using a flair nut wrench, disconnect both ends of the hose & remove it. New one goes back in the same way other one ...
...in the other gears. its like it is in nuetral when it goes from first to second gear That's called flairing and is not a good thing (indicates pressure loss inside unit) If you haven't changed the ...
...to one) Diffs come with a tag on diff cover but many times tag gets lost if unit is serviced. Use flair nut wrenches on all hydraulic fittings, Plenty of wd40 on all hardware and support the body ...
Question about 1994 Grand Cherokee
...in parking lots...I have a 93, which measures 171/2" from center of rear wheel hub to edge of wheel flair.) If standing height is too low, shocks are not working at the center of travel but at the ...
...parts to avoid damage while driving (don't forget that differentials , springs etc travel up and down. Also stay clear of hot pipes. Use several sections of line, joining them with brass unions (non ...
Question about 1993 Grand Cherokee
parts should be removed to get at the line? thanks Nothing but the hose needs to be removed. Best tool for that is a "crows foot" (flair nut version). (looks like a wrench end with a provision for a 3
...clamps securing it. That one is the return hose. The other one is the high pressure line, which has flair nut fittings on the ends. There is no way to repair that one (pressure will blow any repair ...
Question about 1999 Grand Cherokee
...fittings Your going to need to buy tubing at the auto parts store, cut,flair & bend, as necessary, to fabricate the rusted out one your replacing,you can't buy ready made tubing,even for a new ...
Usually answered in minutes!
3,350 Questions
3,279 Questions
2,899 Questions
2,715 Questions
2,521 Questions
