Questions & Answers for: Samsung fl error

...fl=&disp_nm=CLP-300N) Reinstalled printer from control pannel : Same error Tried to print a test page using the Samsung s/w : success; Tried to print from note pad : Failed... Restarted the print ...

...FL washer wf306law fills up with way too much water and give error code and stops? Requiring a service tech....what could this be? I am not a repair professional. I am just a 78 year old man who has ...

fl code comes on starting washer wont start Check the door switch and also the INLET valve. it is possible that there is an error feedback to the controller unit and so it fails to start the cycle. ...

error code FL and door will not lock to start cycle The FL Code means that the door failed to lock. Turn the machine off and restart the cycle. If this does not clear the error message and the machine

fl error code The "FL" code indicates that the unit failed to lock the door, which would prevent the machine from running. If this happens again, close the door tightly and restart the cycle. If the ...

FL error. I have tried restarting it, opening and shutting the door again. I just don't know what to do! I looked in the owner's manual and it just says that I need to call a technician out. Of course

and then back on again. Restart the cycle and see if it restarts without the "FL" code returning. If the error code returns, there is a problem, which needs to be diagnosed by a Samsung service person

...error code FL (failure to lock door) but door is locked and will not unlock. Used to happen only on Sanitize cycle. Now occurs on all cycles. Unlocking the door takes time - it will just unlock after ...

...FL The washer failed to lock the door Hr Washer temperature control problem Heater Relay Failure (on main PCB) LO The door will not unlock 5E Washing machine has failed to drain the water 4E Water ...