Questions & Answers for: fix washer nozzle

washer sprayer jut stopped, I can her it trying to pump, the reserve is full and the front washers work fine. Any suggestion to fix it myself? I checked the actually squirt opening, it is clear. Help!

...washer the motor 'Pulses' On and Off continuously. About one second on then one second off. I have a variable pressure lance and if I reduce the pressure it works without a problem. What's wrong - is ...

Fix washer nozzle How do you replace the windshield washer nozzle? It's simple but, I dont want to do any damage because parts are hard to find. Unless it's already broken, try putting a fine piece of

...washer pump, remove one of the pipes from the nozzle and check if the pump is giving fluid, if not you will need to replace the washer pump, if it does the nozzles are blocked and you can use ...

washer is running (garden hose attached) no pressurized water is ejected from wand. I think it is a pressure relief issue. What canI do to fix this problem. Most of the time the problem is just debris

...fix low pressure on windshield washer fluid sprayer. Its just plugged up, probably right at the nozzle it's a pretty tiny hole. To clear it out you need to find a small diameter wire that will fit ...

...fix this without taking to dealer? YOU CAN GO UNDER THE HOOD, AND LOCATE THE HOSE GOING TO THE SPRAY NOZZLES! THERE SHOULD BE A T-SHAPED AREA WHERE IT SPLITS OFF TO BOTH NOZZLES! UNHOOK IT THERE AND ...

...fix tips? If when you take the High Pressure water hose off the pressure washer pump no water will come out they you may simple have the bypass valve stuck. You may need to just remove the outlet ...

...washer operating pressure. If you have any lance issues then the pressure could be running higher than specified (machine running at same pressure as spill valve operation pressure) your machine ...

...fix a misdirected windshield washer The drivers side windshield washer is spraying windshield washer fluid over the top of the truck. Not hitting the windshield at all. You can use a small sharp pick ...