...the automated attendent. I spoke to a customer service rep. They are aware of the problem and are fixing it for free, but only until 12/31/07. I suggest you call ASAP and get your name in the ...
Question about Cybercam GR-D70 Mini DV Digital Camcorder
I can't get the tape out. It's stuck! I cannot get the tape out. The mechanism come up correctly, but I can only pull the tape out about 1/2 inch. As Mark correctly points out the tape has probably ...
...fix your wedding video. There are companies that will repair videos and re-spool them. The costs are high so weigh up if this is right for you. I can?t see what the pros would do differently. Video ...
Lense Cap Error My recorder says "lense cap" when the lense cap is not on and the viewfinder stays dark. Is there a way to repair this or a reset that I can do? This problem is caused by a stuck ...
Question about GR-DF430 Mini DV Digital Camcorder
when i try to record with my jvc mini dv camcorder it says lens cap and the lcd stays dark.how can i solve this? The problem is caused by a stuck aperture inside the optical block assembly. You have ...
and capstans, play heads and runner rollers. The belt is likely stretched and sticky, replace it with a new belt. I use a product called rubber renue on the roller to stop it from sticking to the tape
Question about Cybercam GR-DVM90 Mini DV Digital Camcorder
Can't get rid of the safe mode. Error 04. Know matter what I do Are you already try changing tapes, if still try to hairdying the mecanism if you use the same tape after first try turn forward your ...
E03 eject and reinsert tape Hi Some black rubber part felt off from my camcorder. Now I have E03 error eject and reinsert the tape Can you tell me how or where should I put the small rubber part back?
Question about GR-D73E Mini DV Digital Camcorder
...break them. on the rubber rollers scrub them . then load the tape an watch it run. its easy to fix this but you need a nice clean place an some small phillips , take pics of parts/screws if ...
Record button not workig hi, there is several reasons for not work the record function, first of all make sure that the cassette is good and the safety tab is in record position, then check the ...
Usually answered in minutes!
173 Questions
162 Questions
138 Questions
83 Questions
94 Questions