Questions & Answers for: fix a door knob

fix a knob hole I have a problem with my door knob holes and also with my cupboard knobs, they all shake a bit, they don't sit properly in there place. How do i fix this problem? Thanks Tightening the

...or home improvement store (ACE, Lowes, Home Depot, etc.) Try to hire an experienced contractor for fixing out your home issues. You can get more benefits in addition to it. This can make it proper ...

...fix.. just obtain part # 154535903 - KNOB and replace. however if you broke the shaft off inside the knob you will need to procure part # 154668901 - CONTROL MODULE remove power from the dishwasher ...

...fix 'em. Open the Door Knob with a screw driver, gently pull aart the two knobs once open, then look for a long sliding rod, pull one knob away, twist the Knob untlil it is in unlock position, put ...

...door handle on my back door is loose and has alot of play on it If it is not the OLD style door knob, tighten the two screws next to the knob. If that does not fix it it will probably need

...fix a wobbly door knob that's already been tightened? Our door knob is loose/wobbly which makes it difficult to open the door at times, so I just assumed it needed to be tightened. I tightened both ...

...fix? yes, close the door. There should be a latch to prevent opening the sliding door opening when the fuel cap door is open. It could be malfunctioning. There is a cable from a push knob behind the ...

door open. Key does not fix jam either a panel beater has ways around this if you can get to the inside of the door cut the door card away and release the lock find a replacement door car at a wrecker

...door knobs knob wont turn Did they? Need to know more. Is it just a latch or privy latch with turn nib? A spindle runs through the door latch cylinder into each knob so it could be a case of the knob ...

t come all the way up using key or pulling. And hence I'm unable to open the door. Any ideas for a fix? You will have to remove the inner door panel to find out what is preventing movement of the knob