...broke. I don't know how to get the cable attached to the metal connector. Is there any tool out there that can help fix this so I don't have to rip open the wall and replace the whole thing? If I ...
...broke at the connector. I believe the ground wire is the second wire rom the top on the second row of wires. Unfortunately, the connector plugs inside the plastic houseing break and pull out. The fix ...
on The solder joints broke on the push button's PC board at the connector. Pop out the button assembly , disconnect from wire harness and re-solder the connector pins to the PC board. Very easy to fix
...broke off? Any simple fix? a new connector must be soldered in tuner if it was ripped out and did not break the pc board that it was attached to if it was on a switcher u could replace the unit or ...
Question about Activision Guitar Hero World Tour for Wii
...h my son broke the wire that connects to the cymbol on the bottom side. He broke it at the connector, pulled the wire out, and I need to know how to fix it. no way to fix it i am so sorry for ...
...wire. It is not noticeable by looking at the wires because it is the copper wire inside the insulation that will be broke. Find the broke ones and splice in new wire and the problem will be
Question about 2004 Neon
broke the kill switch wire from at the inline connecter. I have 2 small probes (end of wire) from the motor that pulled out of that connector end. The connector from kill switch seems to 25cc 17"
broke loose while trying to disconnect the locking connector. Will I be ok directly soldering the wires to the circuit board or is there likely to be some other issue causing the wires to overheat? It
...fix the injectore wire on my 1999 durango? Depends where it is broke at. If it is broke at the head where it connects to the injector you will need a new wire but if it is broke back say two inches ...
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions
