...and perhaps one hour or so labor. It looks like you have been charged much more than 1 hour for fitting. Ask your garage for a breakdown of the work carried out and the price of the parts
...fit your new alternator but, if it was the reason for the alternator quiting in the first place, then your new one won't work after you do it, so i suggest you return the alternator and demand the ...
...see when you look down on the passenger side standing near the front of the engine compartment. If fits over the alternator and the engine pulley. The belt beneath it is the a/c belt (if the car has ...
...back of it. JUST REMEMBER TO DISCONNECT BATTERY EARTH LEAD FIRST then reconnect when new alternator fitted, ensure alternator drive belt is tensioned correctly also. hope this ...
remove the battery, remove the wires from teh alternator, loosen and remove the dive belt, and remove the alternator. Take it to an auto electrician to be rebuilt, or buy a replacement and fit back in
...the rear of the car, this will slacken off the belt. Remove and fit new one. Slide alternator foward untill their is around 10-15 mm deflection in the belt, and tighten alternator mount bolts ...
fit then alternator will fit even if you have to swop the puleys over abd make the wiring connections to fit ,ok if one alternator is say 70 amp and the other 90 amp it will still work good enough for
...Hi Tom, The adjustment of the alternator is carried out by 1) loosening the locking nut which is fitted to the top front housing of the alternator and is fitted parallel to the alternator. 2) ...
Question about 1989 Camry
alternator or not . If the alternator is a second hand one have you checked it if is working before fitted on the car
the belt ,disconnect the battery undo the bolts holding the alternator take note on how the belt is fitted up to all pullies ,write a diagram so you don't forget,remove alternator
Usually answered in minutes!
1,828 Questions
1,753 Questions
1,565 Questions
1,303 Questions
1,231 Questions