Questions & Answers for: Saturn how to fit an alternator

...Alternator (or the feed lead or the thick lead )going to Alt and put it on a bit of rag and not onto any thing metal and try the short test again ,if still there then put back the Alt lead and then ...

...and body is a different story. You may find tie rods, struts, etc the same, but a headlight won't fit from one to the other. If you've got a 2004 Saturn Ion, you likely have a 2.2 EcoTec. Pretty ...

...with the four pins? hi i think der is no plugs which hooks up alternator. it s jus a wire fitted to it.so ccheck the bushes in alternator.check the tension in it. and check wether it is ...

...alternator.there two bolts one on the bottom and the top the top bolt is the hardist to get out and back in I used a short piece of plastic tubing big enough to fit snug on the head of the bolt. Hope ...

...engine to chassis earth strap or the alternator ,start engine then disconnect neg on battery if engine stops renew the alternator ,if engine continues to run renew the earth strap or fit another ...

...how to do as well as how much it costs A Few dallars at your local parts store. You might need some fittings which they should have as well. about 10.00 if you do it yourself its not that hard to do ...

Hello, I have a 2003 Saturn L 200 that is giving me fits. When I start it the Battery light comes on with all the other dummy light then they all go out, but about 30 second later the Battery light ...

alternator on my 03 saturn vue 3.0 is off, but won't fit out of the wheel well or any where else! Anyone else had this problem? Hot do I get it out of the car? only way is to remove the side shaft and

...the connectors are shiny-clean. (You can but a terminal cleaner, with wire brushes to clean the fittings both inside and out, for a few dollars.) Also, it's uncommon, but there's no law that says ...

...alternator? can't fit our the top or bottom, what's the trick. -Disconnect negative battery terminal. -Take the airbox out of the way, easier to work on. -Remove the two long screws holding the ...