Questions & Answers for: Dewalt no fire

Question about Heavy Duty 2 Brad Nailer Compressor Combo Kit

2 Answers

...there a way to prevent accidentally firing a nail? Professional-grade varieties are automatic, and fire a nail directly upon pulling the trigger. A semi-automatic nail gun is more appropriate for ...

Ad

Question about DC616kn 18 - volt 16 - gauge straight finish nailer

5 Answers

two years old,but does not seem to be firing,the battery is good because the gun loads up but dosnt fire .what could cause this problem I have both the DC616 and 618 and have used them sucessfully for

Ad

Question about DC618KA Angled Nailer Kit

1 Answer

hi there. My dewalt dc618 has stopped firing nails. Was putting on oak facings when a nail jammed so got it out with opening clip at top of nail cartridge. when tryed firing another nail guns not ...

Question about DC618KA Angled Nailer Kit

1 Answer

dc618 brad gun wont fire on bump Gun will not fire on bump mode ok on single nail mode The link below is where you can download the owners manual. The link is on that page near the top right hand side

Question about DC616kn 18 - volt 16 - gauge straight finish nailer

2 Answers

dewalt dc618 wont fire Changed one of the rubber bands that return the firing pin. gun fires once then battery flat light flashes and it wont fire again. remove battery and refit it and the gun fires ...

Question about D51321 3/4" 1 3/4" Heavy Duty Coil Roofing Nailer, 70 120 Psi

1 Answer

keeps repeating itself fires two nails when you pull trigger once Most nailers have a two position setting on the trigger to allow for single fire or bump fire. If set on bump fire, the gun will work ...

Question about D51844 Framing Nailer

1 Answer

...valve. Connect air and very quickly depress the firing pin all the way in with finger. If the gun fires, adjust the safety foot to depress the firing pin all the way in. If the gun does not fire, ...

...D51844, has stopped firing. When you squeeze the trigger, air leaks out a little, but it doesn't fire. Its in single shot mode. If it has a depress style safety it might not be traveling quite far ...

Question about D51844 Framing Nailer

1 Answer

nailer firing weak weak firing Usually this is an air pressure problem. You can safely set your compressor anywhere between 90 -110 psi for nail guns. Also check the adjuster near the nose of the gun.

...have a dewalt D51845 it was leaking air when I bought it so I bought a repair kit and fitted it it fires 50mm nail but not 90mm nails it comes out the side Ok bought a dewalt D51845 air nail gun it ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Dewalt Air Tool and Compressor Experts

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66949 Answers

Are you a Dewalt Air Tool and Compressor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...