Questions & Answers for: final drive ratio

...final drive ratios,all monitored by the computer with electronic speed sensors.If the trans from the 95 has a different ratio than the 93,the computer will set gear ratio error codes,and possibly put ...

final drive ratio change I need to know if it is possible to change the final drive ratio of a 1982 Porsche 944, and if so , what options are available and how do I go about it? change the pinnion and

...or final drive ratio in each particular gear. If you are strictly speaking about the transmission the gear ratios are as follows. (1) 3.21 (2) 2.21 (3) 1.60 (4) 1.23 (5) 1.00 ...

...final drive ratios on a vulcan 1500 For the gears: Gear ratios:1st 2.500 (40/16) 2nd 1.590 (35/22) 3rd 1.192 (31/26) 4th 0.965 (28/29) 5th 0.781 (25/32) Final Reduction Ratio 2.619 (15/21 x 33/9) and ...

...SPECS SAY THE FINAL DRIVE RATIO IS 3.685 TO 1 IS THAT ENG SHAFT TO DRIVE AXLE RATIO? Yes, rear end only. If you have overdrive gear in your tranny, the engine to axle ratio will be lower in

...ratio in the transmission and the final drive. The only way to change this would be to change the final drive ratio in the transmission, and there likely are no aftermarket solutions available to

ratio tag location location of ratio plate or tag on transmission FQ3 A FQ3 HAS A 2.86 FINAL DRIVE RATIO. Dont know why they wouldnt know that seeing as that is what that RPO means.

...The closest I can find is 1st---3.15---2nd--1.91--3rd--1.28--4th--.95--5th--..76 rev--3.62 and final drive (diff ratio )3.59. You can check these at a ford dealer ship in the workshop manual ...

2000 270 7.4 bravo3 what is the gear ratio not enough information to get the answer fault code reading , final drive ratio or what ? post it all again as posts are not linked

...final drive ratio (lower) and a transmission with closer ratios which meant a higher first gear ratio - hence the lower final drive ratio. From memory the solenoid protruded around 3 inches from the ...