Questions & Answers for: Sony filter warning

...warning! The Capacitor is the big black cylindrical object on the other side of the board near where the flash cables connect. It has two leads which connect to the board about 1cm apart, just by the ...

...filter regularly, don't put it in! Although you can take the back off and clean it I have found that taking compressed air and just blowing the fans on the back thru the vents seems to work just as ...

...Before shipping remove tape, battery, straps, external mics, filters and anything else you don't want to lose. Good Luck, ...

AUTO AND IT WILL NOT SWITCH TO MS. ALSO PERIODICALLY PROJECTOR LAMP WILL JUST TURN OFF, NO HEAT WARNING OR FILTER WARNING If you unplug the unit for a few hours prior to use this will fix the problem

...filter warning sign comes up and then shuts the projector down in 1 min. I have changed the lamp and filter. How do i reset the timer for the Lamp Hours and get rid of the warning? Once the filter is ...

I was filtering my foxtel signal through an I was filtering my foxtel signal through an Arista surge protector board and on Monday 14/09/2009 the Free to air channels started to get weak or no signal ...

There is a risk of data loss. If a router has been specifically configured (PPPoe, DSL, MAC address filtering, security, etc.), the settings will be removed by resetting the router and it will have to

warning that appears on the TV beforehand that indicates the lamp is nearing the end of its life. I have heard from a friend with a similar problem (different model TV), that there is usually a filter