feed dog is stuck The feed dog is stuck in the down position, and it will not adjust to the higher position when I adjust the feed dog control. Thanks I have the same problem...this is a work around, ...
ep1083 copier the top feeder does not feed If the machine sees the ADF ( auto document feeder) but does not feed the paper? Does it try to feed the paper? Does it pull the paper is a little and jam? ...
hp laserjet p3005dn tray1 manual feed problem i have hp lasserjet p 3005dn when printing to manual feed "manually feed A4" appear so every time must go to printer to resume print. for your info the ...
How do you get rid of a microsoft feeds synchronization error Windows Internet Explorer 8 Start Internet Explorer. On the View menu, point to Explorer Bar, and then point to Feeds. In the navigation ...
feet not feeding and thread bunching up the presser foot or what ever foot your sewing with does not feed the fabric,, the feed dogs in the needle plate are what moves the fabricto be sewed, the feet ...
Feed Dogs I don't see any difference between feed dogs up or down. When in the down position the feed dogs still rise above the needle plate. Have to confess I only now see that the presser ...
Question about 6015 Mechanical Sewing Machine
why are my facebook settings different on my computer and mobile The mobile version seems to display the "Pages Feed" (feed of pages you like) and the "News Feed" (feed of people you like) on the same
janome 3050 feed dogs wont come back up Dropping the Feed Dog The feed dog can be lowered with the drop-feed lever for sewing on buttons etc. Shift the drop-feed lever to the right to lower the feed ...
Question about 6015 Mechanical Sewing Machine
Feed dogs go backwards, how do I change its direction? Typically the fabric feed and direction are effected by the height of feed dogs. Likely either the feed dogs are sticking(not dropping) or there ...
Question about 6015 Mechanical Sewing Machine
...feed continuously. Try disconnecting the wire feed motor from the welder and see if the wire still feeds. If it does not, then the motor is likely the problem. Check the wire spool: Make sure that ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions