Question about PIXMA MP600 all-In-One InkJet Printer
...feed roller is dirty, paper is not fed properly because the paper feed roller slips. Cleaning the paper feed roller could resolve the paper feeding problem. Please follow the instructions below to ...
...at the fuser? The feed roller at the beginning seems to be working but after the paper passes there it jams. It might be the feed roller. Sometime its the roller or the clutch if it isn't
...feed roller is dirty, paper is not fed properly because the paper feed roller slips. Cleaning the paper feed roller could resolve the paper feeding problem. Please follow the instructions below to ...
hp deskjet 6122 paper feed the paper picks up and begins to feed, but them jams in the top feed rollers. The left side of the rollers seem to be feeding the peper correctly, but its as if the right ...
Question about PIXMA MP190 All-In-One InkJet Printer
...feed roller's slippage. If paper does not feed correctly, perform the following to clean the paper feed rollers: Open the Printers folder. - For Windows XP Home Edition : Click/Select 'Start,' ...
Question about MX300 Office All-In-One Printer
...Feed Roller (Roller Cleaning)Clean the paper feed roller if paper is not fed properly. Cleaning the paper feed roller will wear the roller, so perform this only when necessary. 1. Make sure that the ...
Question about MX300 Office All-In-One Printer
...feed roller cleaning function allows you to ckean the paper feed roller. perform feed roller cleantng when there are paper particles sticking to the paper feed roller and paper is not fed ...
Question about Color LaserJet 5500 Printer
feed roller and a Seperation Pad If toner has spilt on to the top of the manual feed Roller Housing theres a good chance it may be Seeping on to the print paper Via the Feed roller Instructions:- open
feed roller is the larger roller. 3 Pinch the tab on the end of the cassette pickup roller (callout 1), and pull the roller out. 4 Pinch the tab on the end of the cassette feed roller (callout 2), and
...feed roller home position sensor is not detecting the feed roller position, obviously, I would say. Or the circuitry that senses what that sensor is telling it, isn't connected or is just plain dead. ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions
