Questions & Answers for: HP DeskJet feed problems

...problems The orange lighthas started to blink and will not print. changed cartridges but stillthe same - Help? Regards Paul HumphreyPump Africa Lda try pressing the feed button and hold for a couple ...

paper feed problem when paper begins to feed, it all of a sudden crumples up and to the right on the feed and stops feeding. new problem, printer is several years old and never did this 1. Turn the ...

...i took it out the orange light remains on and nothing happens. I cannot print After clearing the feed, you usually have to manually tell the printer it is cleared since after a feed it just

HP 5743 When switching on it feeds a sheet about halfway through and stops. The paper feed light then flashes. If I push this it feeds that sheet through, picks up the next sheet and feeds that half ...

Feed paper light stays on, and paper doesn't feed through Is there a way to fix this problem? The feed paper light stays on and no matter how many times I click on it, the paper won't be fed to be ...

problems...Make sure you fan the paper before loading it. You might try putting a fan on it to dry out the ink as it prints...or try a heavier paper. Good luck! If you google duplexer feed problem you

Printer WON'T Feed Before, the printer prints OK. But recently, it (printer) won't feed any paper. The gears will just turn and it won't feed any paper. I disassemble it but I don't where to look for ...

...feed problems. You can find isopropyl alcohol at any drug store(it is rubbing alcohol). I would verifiy the the feeder rollers are clear of debris and make sure there rolling by rolling your finger ...

...the paper and print but it is not going inside. I have the message out of paper Hi, Its the paper feed mechnism problem. Try to clean the paper roll with cotton using warm water. if still the ...

...feed button, one blank page feeds through and the button begins flashing again. I have tried pressing the button numerous times and it keeps feeding blank pages. How do you clear the printer? I have ...