Questions & Answers for: fax report busy signal

FAX machine sends but doesn't complete connection, error report is busy/no signal. I have had the phone co check external line and private tech check internal line. Unable to receive also. Unit worked

...busy. I don't want to unplug it and risk losing faxes in memory that need to be printed. How do I get the fax out of sleep mode and back to printing? The sleep mode is only a power save mode. You may ...

...fax line check Hi, I am having problems receiving faxes. Senders report getting a busy signal on the phone line and a return of their faxes. We get a dial tone at the home office and can send faxes. ...

...This brand new m/c after hooking up with the dedicated phone line does not send or receive the fax sending the fax always give me busy signal report what should I do. sunil Obviously.....take it

Fax Test report indicates all PASS - all connections are OK. I disconnected the credit card machine and switched the fax line with the phone line. No success. I do not have VoIP. When someone tries to

...fax start, it pulls the document through, then just beeps every 2 seconds. It then does put out a transmission verifacation report that says - busy. The number that you are sending to is either busy, ...

...report comes through they did not get fax. Sometimes it goes through 1 out of 10 maybe, I tried un plugging all. I fax other long distance fine. PROBLEM IS NOT YOUR FAX 99%CHANCE IT IS THE PHONE LINE ...

report, under comment is states TX ECM I know the TX is transaction (I think?) what does ECM stand for ECM (Error Correction Mode) The Error Correction Mode (ECM) is a way for the fax machine to check

...fax. I am using Comcast Voice. When the phone line is connected directly into the telephone I get dial tone. when it is connected to the All-in-one we get a slow busy signal. I have been on the phone ...

...fax mode then enter the number Next I press start then ok .ican hear the ring tone and after the connection is established i see on the display transmit led so far for the last 2 days I get a report ...