Questions & Answers for: Brother MFC fax picking faxes

...Fax Problem I'm having an issue with incoming faxes. Despite having the machine set to pick up faxes after 2 rings, at times it will not pick-up the fax call at all. Recently I've had several people ...

...fax wont pick up. I cant receive any faxes, the phone on my brother mfc 3360c rings, but the fax never picks up. I dont have the manual for it anymore, and have never never needed to receive a fax ...

fax machine stoped receiveing fax First, check your fax's phone line. Put a regular phone on it and check for dial tone and line noise. If the line is dead or noisy, this will cause a problem.  ...

...faxes - send out is OK When it was first set up (only 1 incoming line), and a call came into the house, the Brother was able to determine if the call was voice or fax, and, if fax it connected for an ...

fax is picking up designated phone# as well as designated fax# I have 2 phone numbers coming in on the same line. The fax# is set by the phone company to have specific ring so it knows it is the fax ...

faxes. I can fax to other people and I can copy. I tried turning it off and on and check all plugs etc. You have to get your answering machine and your fax to play nice. Read the instructions for both

need to set up phone/fax instead of just fax I have plugged phone into phone line with fax line. When I ring the number it rings both phone and fax. I pick up the phone and the screen says press Tel/R

...two or more phone numbers on one line. For example, you could have your voice mail number and your fax number on the same line, but when a call comes in to your voice mail the fax will recognize the ...

I run my MFC-3240C Brother off the same Phone Line for Phone and Fax. I can set my brother to pick up at 4 rings and phone at 4 rings. However I can set my phone to pick up at 6 rings. But the fax ...

the fax keeps ringing it does not pick up This sounds like the FAX mode is not set properly. Follow these steps. Press Menu Press up or down arrow until it displays "Initial Setup" Select Initial ...