Questions & Answers for: Dirt Devil favorites bar Vacuums

Dirt Devil Featherlite - how to remove the beater bar to clean Could someone please tell me how to take the base apart so I can remove the beater bar to clean it. This is an upright. I can't seem to ...

HOW DO YOU CHANGE THE BELT ON A DIRT DEVIL VISION VACUUM CLEANER? With the vacuum unplugged, turn the machine beater bar side up. Locate the clips or screws that hold the plate over the beater bar and

swivel glide has no suction in the hose but seems to have a bit at the head, definatly not alot. can i fix this myself somehow? Get ahold of a plumbers snake, disconnect the hose and run it through ...

The hand cleaner picks up dirt but the floor cleaner does not. A couple ideas. 1. Have you emptied your dirt? 2. Are your filters clean? 3. Is your roller brush working and if not, is your belt broken

the rubber belts I put on keeps burning when I first put it on, it gets so hot on the metal bar I hook it to, that it splits it it two..how do I fix this??? Sounds like the beater bar is clogged with ...

Belt not turning, smells hot, I cleaned brushes and everything. Check to see that the belt has not slipped off of the bristle bar. If it smells hot that typically comes from the smell the belt makes ...

I have a Dirt Devil Reaction D2 Dual cyclonic Technology upright vacuum. The power head (beater bar) will not turn. The belt is fine and on tight. The bar turns freely when I turn it manually. I have ...

A smell like burning rubber comes out of the vents whenever it is used. It starts as soon as the vacuum is turned on. I've emptied the filter, but maybe I need a new one? I don't think the ...

how do I take the agitator end caps off? belt keeps breaking and the agitator seems hard to turn Alliemay657: It sometimes takes a 2 grunt pull to remove the end caps and bearings from the agitator ...

how do I put on the belt Normally fairly simple.............1)Remove the bottom plastic cover. Should be 2 or 3 screws. 2) Pull the bar out (along with the belt) 3) Put new belt around the bar on the ...