FAULTY TIMER/CLOCK Timer has been temperamental recently, once finished timing the whole clock/timer unit would flash and only turning off the power and resetting the clock would allow the oven to ...
Question about 75022 / 75024 / 75029 Gas Kitchen Range
...clock/display panel is faulty. There are a few relays on the display that have to work. If the clock is just flashing once with each keypress the the relays are not functioning. The clock/diplay will ...
Question about SRL50 Clock Radio
...faulty and being a clock radio it means you cant tell what hour it is. I would like to know whether it is a faulty part, bad connection or just a ideosyncracy of larger LED displays. Hi, Offhand, the ...
...both stopped at the same time. remove all fuses one by one and check wich one is blown if blown replace it and see if radio and clock works Citreon C3, illumination on clock/cd display ...
Question about Classic 110 (Dual Fuel) Dual Fuel (Electric and Gas) Kitchen Range
...faulty clock. a thermal cutout may have tripped due to an overheat (either a long days cook or a faulty thermostat...) would be best to get a pro in to sort out as this is a duel fueled unit & ...
clock and it works fine for a few days but then it happens again. No other clocks in the house loose their time so the problem is not due to power failures. You have a faulty display module due to one
...the power to the unit is faulty or burnt. If so replace the transformer. If power goes tto unit without display then the processor can be faulty . Change the clock timer. unit if you need the
...setting the clock, if it is ineffective then I would suggest contacting a professional to move forward accurately. The range may possibly have a faulty wiring or a communication issue with the
Question about CD-740 Clock Radio
...clock radio ? I believe the problem is either a faulty light sensor the unit has to dim the display when the lights dim since it was designed for bedroom use with alrms and snooze button. or it is ...
Question about CD-740 Clock Radio
...is displayed as usual. What does this mean? first thing I would do is check the cables that go to the clock, if they are OK then you likely have a faulty clock module which will need to be
Usually answered in minutes!
1,163 Questions
465 Questions
395 Questions
390 Questions
353 Questions