Questions & Answers for: fault finding sanyo tv

Question about DS32224 TV

1 Answer

...tv to factiry settings to no avail. This is a pin cushoning fault. The failure is in the pin amp, and also most likely in the scan amplifier sections. The scan amps and pin amp in part of their ...

Ad

Question about DS19330 19" TV

1 Answer

...sanyo DS25320 tv for over a year i havent been able to use the remote due to the receiving lens on the tv is broken or it just wont work i changed batterys on the remote even bought a new remote. its ...

Ad

Question about DS25390 TV

2 Answers

...fault on Digital board. Check also the video cable or any external connection cable, if the cable is shorting, or the connector is bad, you can get same flashing state because of the video cable. If ...

...fault I've got a Sanyo DP15647 that suddenly stopped working. It displays a pretty green light when the power button is pressed. But nothing else. I checked it out and both the power board and the ...

...SANYO%20TV%20DP26649/ If you are going to DIY and have proper tools, electronics knowledge, and know safety precaution then please read on: Basic LCD monitor and TV troubleshooting guide: ...

...enough current to be used by your TV. This fault might have cause some other components to malfunction. I would advice you replace the fly back transformer immediately, as a first approach. ...

Question about LN32A330 32 in. LCD TV

2 Answers

fault in lcd panel of your tv. which may be diagnose only after seeing exact condition of picture. I need to increase the brightness on my Sanyo DP26649 TV. The problem is I do not have the remote. Do

Question about LN32A330 32 in. LCD TV

1 Answer

sanyo tv sound dont work how do u fix it Hi, press the "mute" button twice from your remote control and find out if you mistakenly "muted" your TV unknowingly. if that didnt help, then you may have to

sanyo TV turns on and works but standby light not working nothing tried as it works but no standby light anymore Do you mean that the standby LED does not light up; but the set works fine? Of so, ...

...TV and ran channel scan. Why didn't I find any channels? Main system control memory IC fault. Check and replace it. If you wish to get some details; check the site linked here. Pull up older posts. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...