Questions & Answers for: faucet handle alignment

Question about 3175 Legend One Handle Shower Faucet With trol Pressure Balancing Valve....

1 Answer

moen single tub shower handle insatll I removed my tub shower handle and can't remember how to replace. It sounds easy but it's not so far. It's a Moen single handle ( hot & cold in one). The valve ...

Ad

Question about K-T10335-4-CP Lyntier Rite-temp bath and shower faucet with lever ....

2 Answers

faucet made by Kohler, T15101-4S. One day the water stopped coming out. After replacing the pressure regulator (2 cartridge shape) and the stem adapter, it became erratically. Sometimes water came out

Ad

Question about 3-3369PC Ergo Pull-Down Kitchen Faucet with Joystick Handle and Match...

1 Answer

Joystick Handle keeps falling off. anytime you shut off the water by pulling on the joystick handle, the handle itself comes off. I've check the fixture and the spring and hardware all align, but I ...

Question about 2919 Chateau Two Handle Tub and Shower Faucet With Standard Valve In C

1 Answer

...faucet and will not shut off when i turn the handles. the shower head works fine when turned on and stops when turned off. all replaced pipes have no leakage. i removed the handles, so that just the ...

Question about K-12176-PB Fairfax Single Handle Kitchen Faucet With Side Spray Poli...

2 Answers

...handle off and retaining nut loose to remove and replace the inner plastic cartridge 3. Another often problem is that the sprayer and faucet act up when using the sprayer or the cold water quits all ...

Question about Model 441: Signature Single Handle Kitchen Faucet - Chrome

1 Answer

faucet is leaking .. i dont know how take it apart .. how do i take it apart??? Turn off the water,remove the little cap on the handle,it is a little hole in the front.use a delta allen key to loose ...

Question about 6102AZ Kingsley Single Handle Lavatory Sink with Drain Assembly Antiq

1 Answer

I can't get the faucet to not move from side to side after it is tightened donw on the granite vanity top. The base is tight and does not move, but the faucet part still moves a little. How can this ...

Question about 157-081-CR Modera Kitchen Faucet Chrome

1 Answer

...faucet for hot water. Worked great for 6 years -- help! The handle set or retention screw has loosen up and needs tightened. Remove the handle and rotate the stem to the off possession and reinstall ...

Question about Model 470: Signature Kitchen Pull-Down/Out Faucet - White

1 Answer

faucet does not completely shut off when properly aligned This problem exists when the seats get wore a and there is no resistance to shut water off. Replace the seats and springs to correct this ...

Question about Model 470: Signature Kitchen Pull-Down/Out Faucet - White

1 Answer

...faucet, handle turn 380 degrees, I have a new pivot nut from moen and it looks the same as the old one, I do not think it will fix the problem, what else can I do? the internal components of a single ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Plumbing Experts

john h

Level 3 Expert

29492 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66772 Answers

Are you a Plumbing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...