Questions & Answers for: how to get the fan off

...OFF THE DUST FROM THE FAN, THAT SHOULD COOL DOWN YOUR PC AND IT SHOULD STOP RUNNING AT HIGH RPM'S.. FYI... THE FAN IS ALWAYS RUNNING Which fan keeps running, the CPU fan, power supply fan front aux ...

...up to temp then turn off...when fan stays running unplug the coolant temp sensor for the fan< there are 2 other is for comp/gauge> if fan turns off replace sensor if not replace relay for cooling ...

...fan off, press the "fan key" until it says "auto". This will turn the fan off. When the programs scheduled, changes, the fan will go on again. You have to repeat the fan to "auto" each time the ...

...fan in the off position, press and hold the fan button (do not let go). The fan should start at a slower speed and get faster and faster. When the fan is at the speed you desire, let go of the fan ...

...off. The fan may stay on for 30 minutes or more after the cooktop and microwave controls are turned off. The Vent Fan will only operate in 1~4 levels modes while the microwave is working." "Using the ...

off ,the fan relay is getting power so its not letting the fan to turn off.Bypass the fan control relay and see if still the fan works with ignition off or not. For more troubleshooting check the link

...fan is off but the fan is still running . Even if i push the off button the fan still runs My internal heater fan stays on soon as the ignition is turned on . The fan display shows the fan turning , ...

...fan won turn off even when engine is turned off Failed Cooling Fan Module May Cause Fan to Run Constantly or Not At All... Electrical Fan continues running after car turned off Draines

...Fan Off, doesn't work? Hi. Just bought a home and the remote for the Hunter Douglas ceiling fan has a button that says "Fan Off". When we push that button, it does not turn the fan off. The speed of ...

...fan on and off based on temperature settings, so it could be turning on and off as it reaches the desired temperature. Sensor issues: The temperature sensor or thermostat may be malfunctioning, ...