...fan works on #1 setting and #4 setting. If I switch back and forth fast, it may work on #2 and #3. Reostate going bad? blower motor resistor and pigtail bad look under passenger side of dash little ...
The fan will work only at position 4 (maximum), is it the control ? its the resistor. its located down to the left of the blower motor, 4 wires.
fan control only works on high in a gmc 2005 canyon Replace the blower motor resister,it is mounted right next to the blower motor,it has a lug with about 7 wires on it.Just unplug it and remove two ...
...will only work on the knob setting of 4, nothing at 1,2 or 3. HELP!!!!!!!!!!!!!!!!!!!! fan working on 4 only blower motor resistor and it sonds like the window probally disconnect or broke ...
fan will not work on # 2 position At first, the blower stopped working on # 3 and worked on 1,2 & 4. Then I went and changed the resistor and now the blower does not work on # 2 but works on # 1,3
...MOTOR ONLY WORKS ON HIGH? Ok I'm going to be honest and tell u the truth, this exact thing happened to me. There is a 4 part pigtail relay plug connecting to a transister, the high only works because ...
fan motor doesn't work on 1-3 but works on 4 for the A/C and Heater. Is it a fuse or switch problem? It's your blower motor resister. It is located on or near the blower motor. This, when it goes bad,
Question about 2005 Canyon Crew
...motor. Windshield Washer: Don't be too quick to replace the washer pump. The problem is often just a clog in the sprayer heads. You can clean out the sprayer holes with a needle, some have two holes, ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions